Send Message
Home > products > Auto Spark Plugs >
K6RTC BKR6E11 Auto Spark Plugs For Mitsubishi Honda Mazda Dayu

K6RTC BKR6E11 Auto Spark Plugs For Mitsubishi Honda Mazda Dayu

BKR6E11 Auto Spark Plugs

Mitsubishi K6RTC Auto Spark Plugs

M14x1.25 Vehicle Spark Plugs

Place of Origin:

China

Brand Name:

TAKUMI

Model Number:

K6RTC

Certifiion:

TS 16949 / ISO 9001

Contact Us

Request A Quote
Product Details
Thread:
M14*1.25
Reach:
19 Mm
Hex:
16 Mm
Electrode Type:
Cooper Core
Resistor Or None-resistor:
Resistor
Appliion:
Mitsubishi Honda Mazda Dayu
Payment Term:
30% T/T Advance, 70% T/T Blance Before Delivery
Delivery:
By Sea From Any Port Of China
Brand:
Torch/Custmization
Payment & Shipping Terms
Minimum Order Quantity
5000
Price
$0.53/piece
Packaging Details
standard package
Delivery Time
60 working days after advance payment
Payment Terms
T/T
Supply Ability
10000pcs per month
Product Description

K6RTC BKR6E11Auto Spark Plugs For Mitsubishi Honda Mazda  Dayu
 
 
1. Product Details:

Torch Type

K6RTC

Thread

M14x1.25

Reach

19 mm

Hex

16 mm

Appliion

Mitsubishi Honda Mazda Dayu

Electrode Type

Cooper Core

Resistor or None-resistor

Resistor

Delivery

By Sea, from any ports of China

Payment Term

30% T/T ADVANCE, 70% T/T BALANCE BEFORE DELIVERY

 
2. Photo show:
K6RTC BKR6E11 Auto Spark Plugs For Mitsubishi Honda Mazda  Dayu 0
 
 
3. Important Tips:
 1).Be careful not to drop the spark plug on the bottom plate or hard objects, otherwise it will cause internal cracks and changes in the gap between the electrodes, which will damage the performance of the spark plug and even cause the spark plug to fail.

2).The high-voltage wire connector should be pulled out with light force, and the spark plug should not be shaken with force during operation, otherwise the performance of the spark plug may be damaged.
3).The spark plugs can be removed before the engine cools. After loosening, a thin hose can be used to blow off the dirt around the spark plug one by one to prevent the surrounding dirt from falling into the combustion chamber after the spark plug is unscrewed.
4).Around the screw, spark plug electrode and sealing ring must be kept clean, dry and free of oil, otherwise it may cause problems such as leakage and weakening of the leaking spark plug.
5).When installing, first use the sleeve to align the spark plug with the screw hole, and then gently screw it into 1/2 of the full length of the thread, and then tighten it with an afterburner lever; With or without entrained impurities, do not blindly fasten.
6).It should be tightened according to the requirements. If it is too loose, it will cause air leakage. If it is too tight, the sealing gasket will lose its elasticity. Since the cone seat type spark plug does not need a sealing gasket, it is particularly important to observe the tightening torque.


 
 
4. About Our Company:
Our factory has been manufacturing spark plug for more than 58 years, we have ranked China No.1 and world No.3. Besides spark plug we also have ignition coil and cable, all types of filters, mechanical seals, and brake pad.
We have the most reliable welding technologies of platinum and iridium;Therefore, we can produce high quality spark plugs competing with any other supplier.Now, we are asked to manufacture spark plugs as OE replacement for some famous brands.
 
5. Leave Message:
If your are interested in this product or the other products which fall in our product line, please send me a message or write an email to me ( jessica@torchgroup.cn) at any time.

Send your inquiry directly to us

Privacy Policy China Good Quality Generator Spark Plug Supplier. Copyright © 2017-2024 generatorsparkplug.com . All Rights Reserved.